Conductive Polymer Aluminum Solid Capacitors (RP Series)

Type: Aluminum Electrolytic Capacitor
Application: General Purpose
Packaging Type: Through Hole
Capacitance: 270UF
Structure: Fixed Capacitor
Manufacturing Material: Electrolytic
Customization:

Contact Supplier

Diamond Member Since 2005

Suppliers with verified business licenses

Trading Company

Basic Info.

Model NO.
TMCE31
Electrolyte
Electrolytic
Rated Voltage
16VDC
Transport Package
Bulk
Specification
CE RoHS Reach Report
Trademark
TOPMAY
Origin
China
HS Code
8532229000
Production Capacity
100000PCS/Month

Product Description

Conductive Polymer Aluminum Solid Capacitors (RP Series)

Scope: This specification covers polarized aluminum electrolytic capacitors with solid electrolyte for use in electronic equipment.

Reference Standard: JISC 5101-4-2 1998 Aluminum electrolytic capacitors with solid electrolyte
 
Operating Temperature Range-55° C-~+105° C
Rated Voltage16VDC
Surge Voltage18.4VDC
Dissipation Factor (tan δ )0.12
Measurement Frequency120Hz. Temperature: 20° C
Measurement Voltage (V)No more than 0.5Vrms+2.1~2.5VDC
Capacitance Tolerance± 20% (120Hz, 20° C)
Capacitance 270uF

ESR: 12mΩ

Measurement Frequency: 100~300kHz± 10%

Measurement Voltage (V): No more than 0.5Vrms+2.1~2.5VDC

Temperature: 20° C± 10° C

Leakage Current: The rated voltage shall be applied between terminals of capacitor such that the terminal voltage will reach the rated voltage with in two minute and the leakage current shall be measured at following time after the voltage has reached the rated voltage across a 1000± 10Ω Series protection resistor. Then the current value shall not be exceed value calculated from following formula.

Rated 16V/270uF LC(2 Minute) 864uA
Temperature Characteristics: Measurement Impedance at +20± 2° C, 100kHz± 20%

Measurement Impedance at -25± 2° C, 100kHz± 20%

Measurement Impedance at -55± 2° C, 100kHz± 20%

Impedance ratio of the -25° C and -55° C values to the +20° C value shall be not exceed the following values.

Z(-25° C)/Z(+20° C) 1.15

Z(-55° C)/Z(+20° C) 1.25
Endurance( Load Life Test)

Capacitors shall be applied the rated voltage continuously through 1000Ω Series protective resistor at 105± 2° C for 2000hours. After the test and returned in standard condition for 1~2 hours, and the capacitor shall meet the following requirements.

Send your message to this supplier

*From:
*To:
avatar Mr. Reemon Chi
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now