Customization: | Available |
---|---|
Type: | Aluminum Electrolytic Capacitor |
Application: | General Purpose |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Item | Characteristic | |
Working temperature range | -55~+105ºC | |
Rated Working voltage | 2-20V | |
Capacity range | 5.6~220uF 120Hz 20ºC | |
Tolerance | ±20% (120Hz 20ºC) | |
Tangent value of loss angle | 120Hz 20ºC | |
Leakage Current | I≤0.1CV Charge for 2 minutes at rated voltage, 20ºC | |
ESR | 100KHz 20ºC | |
Surge voltage | 1.15 times the rated voltage | |
Durability | After applying the rated working voltage for 2000 hours at a temperature of 105 ºC and leaving it at 20 ºC for 16 hours, the product should meet the requirements | |
Static capacitances change rate | ± 20% of the initial value | |
Loss tangent value | ≤ 200% of the initial specification value | |
Leakage current | ≤initial specification value | |
High temperature and high humidity | Place the product at 60 ºC and 90% -95% RH for 500 hours without applying voltage, and place it at 20 ºC for 16 hours. The product should meet the following requirements | |
Static capacitances change rate | +50%-20% of the initial value | |
Loss tangent value | ≤ 200% of the initial specification value | |
Leakage current | ≤initial specification value |
Temperature | T≤45ºC | 45ºC<T≤85ºC | 85ºC<T≤105ºC |
2~10V | 1.0 | 0.7 | 0.25 |
16~50V | 1.0 | 0.8 | 0.5 |
Frequency(Hz) | 120Hz | 1KHz | 10kHz | 100~300kHz |
Correction factor | 0.1 | 0.45 | 0.50 | 1.00 |
Rated voltage(V) | Capacitance (uF) | Dimension(mm) | L.C. (uA,2min) |
Tanσ 120Hz |
ESR (mΩ 100kHz) |
Rated Ripple current (mA/r.m.s) 45ºC 100kHz |
||
L | W | H | ||||||
2 | 82 | 7.3 | 4.3 | 1.0 | 16.4 | 0.06 | 15 | 5100 |
180 | 7.3 | 4.3 | 1.0 | 36 | 0.06 | 12 | 5600 | |
220 | 7.3 | 4.3 | 1.0 | 44 | 0.06 | 9 | 6300 | |
2.5 | 68 | 7.3 | 4.3 | 1.0 | 17 | 0.06 | 15 | 5100 |
180 | 7.3 | 4.3 | 1.0 | 38 | 0.06 | 12 | 5600 | |
4 | 47 | 7.3 | 4.3 | 1.0 | 9.4 | 0.06 | 20 | 4200 |
100 | 7.3 | 4.3 | 1.0 | 40 | 0.06 | 12 | 5600 | |
150 | 7.3 | 4.3 | 1.0 | 60 | 0.06 | 9 | 6300 | |
7.3 | 4.3 | 1.0 | 60 | 0.06 | 7 | 7000 | ||
6.3 | 33 | 7.3 | 4.3 | 1.0 | 21 | 0.06 | 20 | 4200 |
68 | 7.3 | 4.3 | 1.0 | 43 | 0.06 | 15 | 5100 | |
100 | 7.3 | 4.3 | 1.0 | 63 | 0.06 | 12 | 5600 | |
10 | 18 | 7.3 | 4.3 | 1.0 | 14 | 0.06 | 20 | 4200 |
39 | 7.3 | 4.3 | 1.0 | 39 | 0.06 | 18 | 4600 | |
56 | 7.3 | 4.3 | 1.0 | 68 | 0.06 | 15 | 5100 | |
16 | 15 | 7.3 | 4.3 | 1.0 | 24 | 0.06 | 70 | 2400 |
33 | 7.3 | 4.3 | 1.0 | 53 | 0.06 | 50 | 2850 | |
47 | 7.3 | 4.3 | 1.0 | 75 | 0.06 | 30 | 3500 | |
20 | 10 | 7.3 | 4.3 | 1.0 | 20 | 0.06 | 80 | 2200 |
22 | 7.3 | 4.3 | 1.0 | 44 | 0.06 | 65 | 2500 | |
33 | 7.3 | 4.3 | 1.0 | 66 | 0.06 | 45 | 3000 |