Cbb80-Metalized Polypropylene Film Capacitor for Lighting

• Customization: Available
• Type: Polypropylene Capacitor
• Application: Lighting
• Model NO.: CBB80
• Packaging Type: Surface Mount
• Capacitance: 1-50uf
• Structure: Fixed Capacitor
• Manufacturing Material: Polypropylene
• Electrolyte: Inorganic Medium
• Tuning: Polystyrene Capacitor
• Filter: Polypropylene Film Capacitor
• Tolerance: 5%(J)
• Material: Flameresistant Material
• Transport Package: Carton
• Specification: 35*70, 50*100mm,
• Trademark: TOPMAY
• Origin: China(Main Land)
• HS Code: 8532259000
• Production Capacity: 1000000

Product Description

Specification.

1.Color
-White (plastic housing), Grey (aluminum housing)

2.Installation

- Stud mounting size M8 with hex. nut and lock washer

3.Housing

- Aluminum or non flammable plastic

4.Type

- Self-healing parallel light capacitor

5.Cable

- Capacitor only non-pole will have a copper cable with insulated, size at least 0.5 sq.mm., have 2 cable on a capacitor.

6.Rated Voltage

- 250-280 Va.c.

7.Frequency

- 50 Hz

8.Rated maximum temperature (tc )

- At least 85 °C
10.Discharge resistor

- Have discharge resistor within the capacitorto discharge up to 50 volts. In 1 minute.

- As per IEC 61048 clause 10

11.High-voltage test between terminals and containers

- Must have AC withstand 2000 volt. In 1 minute at ambient temperature.
- As per IEC 61048 clause 13.2

12. Endurance

- Dielectric in a Capacitor must not leak and Capacitor circuit must not be open-circuit, breakdown, and flashover during to the test at 85°C and supply AC power 50 Hz to Capacitor.

-A cable used with capacitor(if any) must not be damaged during the test.

-Capacitance during Before and after heatingmust be difference less than the value in the table