2000hrs SMD Aluminum Electrolytic Capacitor 105C
Features:
Case diameter: 4mm- 10mm
Reflow soldering is available.
Available for high density surface mounting.
Operating over wide temperature range(-40-+105 )° C
Specifications:
Item |
Characteristics |
Operating temperature range |
-40 +105° C |
Rated voltage range |
4V~ 50V |
NominalCapacitance Range |
0.1-1000uF |
Nominal Capacitance Tolerance |
±20% (20° C ,120Hz) |
Leakage Cument |
1≤ 0.01CR VR or 3(uA)Whichever is greater(After 2 minutes' application of rated voltage) CR:Nominal Capacitance(uF) UR:Rated voltages (V):Rated voltages (V) |
Dissipation Factor(Max) |
UR(V) |
4 |
6.3 |
10 |
16 |
25 |
35 |
50 |
tg |
0.35 |
0.28 |
0.24 |
0.20 |
0.16 |
0.14 |
0.12 |
Load Life |
After 1000 hours' application of rated voltage at 105 ,the capacitor shall meet the following requirement. |
Capacitance Change |
Wi thin ±20% of the initial value ( 16V:within 25 of the initinal value) |
Dissipation Factor |
Not m ore than 300% of the initial specified value |
Leakage Cument |
Not more than the initial specified value |
Shelf Life |
After storage for 1000 hours +105 , the capacitors shall meet
the requirement of load life above |
Low Temperature Stability
Impedance Ratio(120Hz) |
UR(V) |
4 |
6.3 |
10 |
16 |
25 |
35 |
50 |
Z(-25°C)/ Z(+20° C ) |
7 |
4 |
3 |
2 |
2 |
2 |
2 |
Z(-240°C)/ Z(+20° C ) |
15 |
8 |
6 |
4 |
4 |
3 |
3 |
Resistance to Soldering Heat |
After reflow soldering according to Reflow Soldering Temperature ,Profile(see page8)and restored at room remperature, they meet the folowing requirement. |
Capacitance Change |
Wi thin ±10% of the initial value |
Dissipation Factor |
Not m ore than the initial specified value |
Leakage Cument |
Not more t |