Key Specifications/Special Features:
Rated voltage range: 10 to 100V and 160 to 400V
Capacitance tolerance (25° C 120Hz): 0 to 20%
Leakage current (uA): 0.02CV or 5mA, whichever is smaller (at 25° C after five minutes)
C: Nominal capacitance (uF)
V: Rated voltage (V)
Dissipation factor (25° And 120Hz): TTND shall not exceed the values shown in the table of standard ratings
Temperature stability (120Hz): Capacitance change
10 to 100V DC: Capacitance at -40° C shall not be less than 60% of the 25° C value
160 to 400V DC: Capacitance at -25° C shall not be less than 70% of the 25° C value
Load and shelf life (+85° C):
Time: 2, 000 hours
Leakage current: Not more than specified value
Capacitance change: Within ± 20% of initial value
Dissipation factor: Not more than 200% of specified value
After test: UR to be applied for 60 minutes, 24 to 48 hours before measurement
Suitable for switching power supply
Operating temperature range: -40 to 85 and -25 to 85° C
Disclaimer: All images with trademarks are shown for reference purposes only. We are not authorized to sell any items bearing such trademarks.
Payment Details:
Payment Terms:
T/T, L/C
Shenzhen Topmay Electronic Co,.Ltd
17-year manufacturer of capacitors
Established in 1998, Shenzhen Topmay Electronic Co. Ltd is engaged in manufacturing, researching and developing a wide variety of capacitors.
Wide product range
Multilayer ceramic capacitors (radial, axial, and SMD)
Ceramic disc capacitors (low and high voltage)
Aluminum electrolytic capacitors (radial, axial and SMD)
Film capacitors (polyester, polypropylene and metallized)
Tantalum capacitors (radial, SMD, axial) and others)
Mica capacitors
Super capacitors
Monthly output of 1 million units
Prompt delivery
In-stock items: three- to five-day lead time
Regular orders: seven- to 10-day lead time
OEM orders: 15-day lead time
Item |
Characteristics |
Temperature characteristics |
Z-25/Z+20 |
4 |
Test frequency |
120Hz |
Surge voltage |
Number of cycles: 1000 Temperature: + 35 ° C Voltage: see specification table V Charging duration 30S Discharge duration: 5min30s Charging resistance: 1000Ω |
After the test Appearance: no visible damage, leakage current: ≤ 2 times the standard value Capacity change rate: ≤20% (compared to the initial value) Dissipation factor value ≤ 1.2 times the standard value |
Pressure release |
Reverse voltage method: Apply a directional DC voltage across the capacitor, and control the current to 5 ~ 10A. Perform the test until the explosion-proof valve is released. |
.. The explosion-proof valve opens to release internal gas. There should be no loud popping or fire. |