High-Quality 0.15UF 400VDC Cl21 Film Capacitor for Electronics

• Customization: Available
• Type: Polyester Film Capacitor
• Application: General Purpose
• Model NO.: TMCF03
• Packaging Type: Through Hole
• Capacitance: 0.01 to 3.3UF
• Structure: Fixed Capacitor
• Manufacturing Material: Polyester
• Electrolyte: Polyester Capacitor
• Usage: Low Frequency Coupling, Filter
• Tuning: Polyester Capacitor
• Filter: Polyester Capacitor
• Voltage: 100, 250, 400 and 630V
• Colour: Brown
• Package: Bulk Ammo
• Description: Mkt
• Name: Cl21
• Transport Package: Bulk, Tape
• Specification: Rohs
• Trademark: TOPMAY
• Origin: China
• HS Code: 8532259000
• Production Capacity: 10000kpcs
• Package Size: 38.60cm * 34.00cm * 20.20cm
• Package Gross Weight: 10.000kg

Product Description

TMCF03 Metallized Polyester Film Capacitor (CL21)


Specifications

Capacitor
1. Metalized Polypropylene Film Capacitor
2. Climatic category: 55, 85 and 2

Referance Standard		GB 10190-88(IEC 60384-16)
Climatic Category		40/85/21
Rated Voltage		250VDC
Capacitance Range		1uF
Capacitance Tolerance		±10%(K)
Voltage proof		1.6UR(5s)
Dissipation Factor		≤0.1%(20C, 1KHz)
Insulation Resistance (20C,1min)		≥25000MΩ  (CR≤ 0.33 uF) ≥7500S    (CR>0

3,Specifications
3.1) Reference standard:               IEC384-2 GB/T7332-96
3.2) Climatic category:                 55/105/21
3.3) Rated voltage:                     50/63/100V,250V,400V,630V
3.4) Capacitance range:               0.001μF---2.2μF
3.5) Capacitance tolerance:             J(±5%),K(±10%),M(±20%)
3.6) Withstand voltage:                1.6U_R (5S)
3.7) Insulation resistance:              C≥.33UF   ≥3000MΩ(20ºC,1min)
                                      C≥.33UF  IR*C≥1000MΩ*UF  
3.8) Tangent of loss angle (tangent):     ≤0.8 %(20ºC,1KH_Z)
4,Material                                                     
4.1) Amboceptor: Polyethylene terephthalate film ( Polyester film )
4.2) Electrode:  Aluminum plating
4.3) Lead line: Tin plated copper clad steel wire
4.4) Coating: epoxy powder coating
5. Mark
5.1) Print voltage, nominal capacity and capacitance tolerance on the capacitors

5.2) Capacitance value representation:

PF	100	1000	10000	100000	1000000
NF	0.1	1.0	10.0	100.0	1000.0
μF	0.0001	0.001	0.01	0.1	1.0
Code	101	102	103	104	105

6. Usage:
      Widely used in various DC and impulse circuits such as communication equipments, radio, TV, VCD and other electronic equipments.
7. Features

No.

Item

Test Conditions

Requirements

1

Capacitance tolerance

Frequency:1KH_Z ±0.1KH_Z,  Test voltage:≤1Vrms

±5%(J)±10%(K)

2

Tangent of loss angle (tangent)

Frequency:1KH_Z ±0.1KH_Z,  Test voltage:≤1Vrms

≤0.6%

3

Insulation resistance

Test voltage:U_R≥100VDC, based on 100VDC    U_R <100VDC, based on 50VDC
Temperature:20ºC±15ºC          Duration time:60±5sec

C≤.33UF CR≥3000MΩ                                                            
C≥.33UF IR*C≥1000S
  

4

Withstand voltage

Between lead wire:Test voltage:1.6U_R, , duration time:5sec
Between lead wire and shell:Test voltage:2U_R, ,  duration time:5sec

No breakdown or arcing

5

Rapid changes in temperature

Temperature:θA=-40ºC,θB=+85ºC
Under the high or low temperature exposure time:30min
Conversion time:2~3min
Number of cycles:5

No visible damage on surface
Δc/c≤5%
tgδ≤1.0%

6

Tensile strength of lead wire

Pull:

Lead wire diameter(mm)	Pull
0.3<d≤0.5	0.51kg
0.5<d≤0.8	1.0kg

No mechanical damage,such as lead wire fracture, loose

7

Bending strength of lead wire

(Half of terminal), load:

Lead wire diameter(mm)	Load
0.3<d≤0.5	0.51Kg
0.5<d≤0.8	1.0Kg

Positive and negative two directions,should bending twice in a row on each direction, bending angle =90°

No mechanical damage,such as lead wire fracture, loose

8

Weldability

Ta method 1
Solder temperature:260ºC±5ºC
Solder time:2.0±0.5sec
Solder: Environmental protection material(lead-free)
Flux:25/75(rosin/ oil refined)

More than 90% area with tin

9

Welding heat resistant

Solder wetting method
Solder: 260±5ºC
Wetting time:10±2sec
Thickness of the heat insulation shield:1.5±0.5mm

c/c≤2%
No visible damage

10

Vibration

Frequency:100~500H_Z
Direction and time: Each 2 hours on 3 directions, total duration time is 6h,
Amplitude: 0.75mm:
During the last 30mins on each move direction vibration test, do electrical measurements to check intermittent contact or open circuit, or short circuit.

No visible damage on surface,
No ≥0.5ms intermittent contact,no open circuit or short circuit

11

The steady state hot and humid

Temperature:40±2ºC
Relative temperature:90~95%
Applied voltage:rated voltage
Duration time:500h
To test the capacitors after keeping 1~2 hours under the normal atmospheric pressure

No visible damage on surface,
ΔC/C≤5%
tgδ≤1.0%
C≤.33UF CR≥3000MΩ                                                            
 C≥.33UF ≥1000S

Insulation resistance: CR <=0.33uF >=12, 500MQ UR <=100V
CR >0.33uF >=3, 750MQ. UF UR <=100V
CR >0.33uF >=25, 000MQ UR >100V
CR <=0.33uF >=7, 500MQ. UF UR >100V

Features:
Metallized polypropylene film, epoxy resin coating
Low dissipation factor with high frequency
Small inherent temperature rise
High insulation resistance, good self-healing property
Suitable for DC, pulse, high frequency and high current circuits
S-shaping correction of color TV sets

Product Certifications:

Certificate Standard: UL
Certificate Number: 104640001
Issue Date: 30-Jun-2004
Certification Agent: Underwriters Laboratories Inc


Certificate Standard: SGS
Certificate Number: GZSCR041248032/LP.
Issue Date: 24-Dec-2004
Certification Agent: SGS -CSTC LTD

Certificate Standard: RoHS
Certificate Number: CQC06130017473
Issue Date: 08-Sep-2006
Expiry Date: 07-Sep-2007

Certification Agent: China Quality Certification Centre

Packing:
Carton

0,047uFx630VDC±10%   P=10mm				10,000	$0.0190
0,15uFx400VDC±10%     P=10mm				20,000	$0.0220
0,22uFx630VDC±10%      P=15mm				30,000	$0.0280
0,33uFx250VDC±10%   P=15mm				10,000	$0.0240
0,33uFx400VDC±10%    P=15mm				10,000	$0.0261
0,33uFx630VDC±10%     P=20mm				30,000	$0.0375
0,68uFx250VDC±10%      P=15mm				10,000	$0.0255
1,0uFx100VDC±10%      P=15mm				15,000	$0.0293
3,3uFx400VDC±10%      P=27.5mm				5,000	$0.1090
0,47uFx100VDC±10%      P=10mm				10,000	0,023