Standard Aluminum Electrolytic Capacitor 125 degree for 2000H
Standard Aluminum Electrolytic Capacitor 125 degree for 5000H
Standard Aluminum Electrolytic Capacitor 130degree for 4000H
Specifications
ItemsCharacteristics
Rated Voltage Range: 6.3~450V. DC
Operating Temperature:
Rang-55~+125degree(6.3V~63V); -40~+125degree(80V~450V)
Capacitance Tolerance: ± 20%(M) (25degree, 100 or 120Hz)
Leakage Current: I≤ 0.02 CV or 3(μ A) (6.3V~100V) I≤ 0.03 CV +10 (μ A ) (160V~450V)
Where, I: Max. Leakage current (μ A), C: Nominal capacitance(μ F), V: Rated voltage(V)(At 25degree after 2 minutes)
Dissipation Factor tanδ
Rated voltage(VdC)6.31016253550~100160~250350~450
Tanδ (Max. )0.240.200.160.140.120.100.120.15
(25degree, 100 or 120Hz)
A When nominal capacitance exceeds 1000μ F, add 0.02 to the value above for each 1000μ F increase.
Low Temperature
Characteristics
(Max. Impedance Ratio)Impedance ratio at 100Hz or 120Hz shall not exceed the values given in the below table.
Rated voltage(VdC)6.3~1625~6380~100160~250350~450
Z-40degreeZ+degree4610
Z-55degreeZ+20degree54///
When nominal capacitance exceeds 1000μ F, add 1 to the value above for each 1000μ F increase.
Shelf LifeAfter storage at 125degreefor 1000 hours, the capacitors shall meet the following requirements. (500 hours for 350V~450V)
Capacitance Change≤ ± 20% of the initial value
D. F. ( tanδ )≤ 200% of the initial specified value
Leakage Current≤ 500% of the initial specified value
Load LifeAfter application of rated voltage with rated ripple current for the 2000hours at +125degree, the capacitors shall meet the following limits.
Capacitance Change≤ ± 20% of the initial value
D. F. ( tanδ )≤ 200% of the initial specified value
Leakage Current≤ The Initial specified value
OthersMeet Q/RME 40-2008, GB/T 5993-2003
| Item |
Characteristics |
| Rated Voltage Range |
10~450V.DC |
Operating Temperature
Range |
-40ºC~105ºC |
| Capacitance Tolerance |
±20%(M) (25ºC,100 or 120Hz) |
| Leakage Current |
I≤ 3 (mA)
Whichever is greater after 5 minutes at 25ºC. |
| Dissipation Factor |
| UR(V) |
200 |
250~450 |
| tgδ |
0.15 |
0.20 |
(25ºC,100 or 120Hz)
|
Low Temperature
Characteristics |
Impedance ratio at 100Hz or 120Hz shall not exceed the values given in the below table.
| UR(V) |
10~35 |
50~100 |
200~250 |
400~450 |
| Z-40ºC/Z25 |
10 |
6 |
7 |
7 |
|
| Load Life |
After application of rated voltage with ripple current for 5000hours at 105ºC,the following specification shall be satisfied.
| Capacitance Change |
Within ±20% of the initial value |
| Dissipation Factor |
Not more than 200% of the specified value |
| Leakage Current |
Not more than the specified value |
|
| Others |
Meet Q/RME 149-2013, GB/T 5993-2003 |
Audited Supplier 
){kind=link}